At least with Expedits, wood glue stuck well to the surfaces (I glue in some wood strips at the back to keep the records from sliding all the way through. to get an even better hold you could rough up the surfaces on the kallax being glued, with some sandpaper, but it probably isn't necessary. put the back panel on, and some weight to clamp it overnight. But, assuming it is, lay the unit face down, spread some wood glue on all the surfaces (no too much). if it is off a little the glue won't be a good option, and brads would be better. If you are using an IKEA Kallax shelf unit as a console table or sideboard, this is a great option for bottles of wine. wood glue may actually work better though, the shelves come all the way flush to the back parts (so they would contact the back panel well. Yes you cannot see the shelves when the back is on but fortunately you can measure and they are not that thin so with a little care it is not that difficult to correctly nail into them from the back. Fine tune with drawers, shelves, boxes and inserts. All I can say is: when you assemble your Kallax, and some of the boards are suspiciously light-weight, then you might have a problem.Ĭlick to expand.i don t think you are wrong, but small brads should hold if there are enough. Standing or lying, against the wall or to divide the room the KALLAX series is eager to please and will adapt to your taste, space, budget and needs. Maybe someone else has already done this and can help. 30 Pack ESFUN Heavy Duty S Hooks Black S Shaped Hooks Hanging Hangers Pan Pot Holder Rack Hooks for Kitchenware Spoons Pans Pots Utensils Clothes Bags Towels Plants. Make sure to keep the heaviest records on the bottom to keep your collection balanced. This item: Ikea ' New KALLAX Shelf Unit, Black-Brown (Black, 44 1/8x57 7/8) 24900. If you need to store more vinyl than can fit in the unit, use dividers to stack them vertically. So maybe you have to nail the plywood to the inner boards (also tricky, because they are thin and you don't see where they are from behind), and use woodglue on the outer boards.Īs I said, maybe im wrong. Place the shelves at least 25-30 cm/10-12 inches from the wall to prevent any warping from occurring. Into a similar bookshelf board from IKEA and the screws did not get a grip at all. I never did it with my Expedits, but I once tried to turn a screw So getting a screw or nail into this cardboard might be tricky. If I am not mistaken, only the thinner inner boards are made of solid fibreboard, while the thicker outer boards are made out ofĬardboard with a hollow inner structure like a honeycomb for stability. I am not sure about this, but I think the Expedit as well as the Kallax are not completely made out of solid fibreboard. Many gamers, myself included, swear by the Kallax shelves available at Ikea. I don't have the Kallax but I used to own several Expedits in various sizes (one I still have).
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |